Audiolab 6000A Stereo Amp & SPEKTOR 6 Speakers, Black HiFi Package
Original price was: $387.00.$99.99Current price is: $99.99.
- Buy with Confidence, Get Quality
- SSL encryption, absolutely safe shopping
- Protect Your Wallet with Safe Payments
- 7-Day Returns, 100% Quality
Full Description
Audiolab 6000A Stereo Amplifier
The Sound of Science
Outwardly, the 6000A bears strong resemblance to the 8300A with its rotary controls and large, central OLED display. Unlike its costlier, analogue-only sibling, it incorporates high-quality D/A conversion, enabling digital sources to be connected directly without an external DAC. It supplies four digital inputs, three line-level analogue inputs, an input for a turntable, wireless connectivity via Bluetooth and a dedicated headphone amp, in addition to its ability when driving loudspeakers.
Digital Circuitry
Much effort has been made to ensure the 6000A’s digital circuitry delivers the level of quality one might expect of a high-performance standalone DAC. As ever, Audiolab has turned to the ES9018 Sabre32 Reference chip family to perform D/A conversion, utilising ESS Technology’s 32-bit HyperStream architecture and Time Domain Jitter Eliminator to deliver ultra-low noise and high dynamic range.
Analogue Circuitry
The 6000A’s discrete Class AB power amp stage delivers 50W per channel into eight ohms, with a maximum current delivery of 9 Amps into difficult loads. The output stage of the discrete power amp circuits uses a CFB (Complementary Feedback) topology, ensuring superior linearity and excellent thermal stability, as the idle current is kept independent of the temperature of the output transistors. A substantial 200VA toroidal transformer, followed by 4x15000uF reservoir capacity (60000uF in total), helps the amp to maintain firm control of the music whilst enabling excellent dynamic range.
Turntables and Headphones
In recognition of the recent vinyl revival, Audiolab has included a phono stage for moving magnet phono cartridges – a high-quality, low-noise, JFET-based circuit with precise RIAA equalisation. Similarly, an increasing number of people are using headphones for music listening, so Audiolab has incorporated a dedicated headphone amp with current-feedback circuitry.
DALI SPEKTOR 6 Floorstanding Speakers
Wide Dispersion
Experience a well-integrated sound, even when listening significantly off-axis. Optimising the audio signal for off-axis distribution results in the signal reaching your ear directly and the signal reflected off the room surfaces, to have a coherent balance. This means a consistent high sound quality across a wider listening area. At the same time offering greater flexibility in positioning the loudspeakers.
Tweeter
The soft dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low colouration. A clear heritage from the DALI high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2).
Woofer
Low-loss drivers made of low-mass paper cones with wood fibre reinforcement. The embedded wood fibre cones gives the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.
Low Signal Loss
By using only DALI designed and custom-built drivers, the need for frequency correction in the crossover is eliminated. This has enabled DALI to design an exact crossover which together with carefully selected quality components ensures that the signal loss is close to zero.
- Available in walnut and black ash vinyl
- 2 x 6½” wood fibre woofer
- 25 mm soft dome tweeter
Package includes
| Gain (Max) | +8dB (Line)
+55dB (Phono MM) |
|---|---|
| Input Sensitivity | 720mV (Line, Volume = 0dB)
3.1mV (Phono MM, Volume=0dB) |
| Input Impedance | 10K (Line)
47K//100pF (Phono MM) |
| Total Harmonic Distortion (THD) | 110dB (Line, A-weighted) |
Digital to Analogue Conversion
| D to A converter | ES9018K2M |
|---|---|
| Total Harmonic Distortion (THD) | 112dB (A-weighted) |
| Digital Filters | Fast Roll-off , Slow Roll-off , Minimum Phase |
Power Amplifier Section
| Gain | +29dB |
|---|---|
| Rated Max. Power Output | 2 X 50W (8 ohm, THD<1 )
2 X 75W (4 ohm, THD |
| Frequency Response | 20Hz-20kHz (+/-0.3dB) |
| Input Sensitivity | 720mV |
| Total Harmonic Distortion (THD) | 110dB (A-weighted) |
| Max. Output Current | 9A |
Headphone Amplifier
| Total Harmonic Distortion (THD) | |
|---|---|
| Output Impedance | 2.35 ohm |
| Load impedance | 20-600 ohm |
General
| Standby Power Consumption | |
|---|---|
| Power Requirements | 240V 50 – 60Hz
230V 50 – 60Hz
115V 50 – 60Hz
100V 50 – 60Hz |
| Dimensions (mm) (W x H x D) | 445 x 65.5 x 300 |
| Carton Size (mm) (W x H x D) | 512 x 467 x 146 |
| Weight | 7.8kg (Net) |
SPEKTOR 6 Specifications
| Frequency Range (+/-3 dB) [Hz] | 43 – 26,000 Hz |
|---|---|
| Sensitivity (2,83 V/1 m) [dB] | 88.5 dB |
| Nominal Impedance [ohms] | 6 ohms |
| Maximum SPL [dB] | 109 dB |
| Recommended Amplifier Power [W] | 30 – 150 Watt |
| Crossover Frequency [Hz] | 2,500 Hz |
| Crossover Principle | 2-way |
| High frequency driver, Quantity | 1 x 25 mm |
| High frequency driver, Diaphragm type | Soft Textile Dome |
| Low frequency driver, Quantity | 2 x 6,5″ |
| Low frequency driver, Diaphragm type | Wood Fibre Cone |
| Enclosure type | Bass Reflex |
| Bass Reflex Tuning Frequency [Hz] | 41.0 Hz |
| Connection Input | Single Wire |
| Recommended Placement | Floor |
| Recommended Distance From Wall [cm] | 20 – 100 cm |
| Dimensions (HxWxD) [mm] | 972 x 195 x 313 mm |
| Weight [kg] | 13.8 kg |
| Accessories Included | Spokes
Rubber Feet
Manual |
Be the first to review “Audiolab 6000A Stereo Amp & SPEKTOR 6 Speakers, Black HiFi Package”
Related products
HiFi Bundles
HiFi Systems
Reviews
There are no reviews yet.